background image

28

PEAK BRIGHT

Use this to activate the brightness limiter.

Example: Setting “PEAK BRIGHT” to “75%”

On “PEAK BRIGHT” of “PDP SAVER” menu, select “75%”.

SEL.

ADJ.

EXIT RETURN

P D P   S AV E R

P E A K   B R I G H T
O R B I T E R
I N V E R S E / W H I T E
S C R E E N   W I P E R
S O F T   F O C U S
O S M   O R B I T E R
O S M   C O N T R A S T

:    7 5 %
:    O F F
:    O F F
:    O F F
:    O F F
:    O N
:    L OW

Information

 PEAK BRIGHT settings

100%:

 The brightness of the screen is adjusted

automatically to suit the picture quality.

75%, 50%, 25%:

 Sets maximum brightness.

The brightness level decreases in the order  of 75%,
50%, 25%. 25% provides minimum brightness.

* These values are approximate.

ORBITER

Use this to set the picture shift.

Example: Setting “ORBITER” to “AUTO1”

On “ORBITER” of “PDP SAVER” menu, select “AUTO1”.

SEL.

ADJ.

EXIT RETURN

P D P   S AV E R

P E A K   B R I G H T
O R B I T E R
I N V E R S E / W H I T E
S C R E E N   W I P E R
S O F T   F O C U S
O S M   O R B I T E R
O S M   C O N T R A S T

:    1 0 0 %
:  AU TO 1
:    O F F
:    O F F
:    O F F
:    O N
:    L OW

Information

 ORBITER settings

OFF:

 Orbiter mode does not function.

This is the default setting when RGB is input.

AUTO1:

 The picture moves around the screen

intermittently, making the picture smaller. This is the
default setting when a Video or a DVD/HD/DTV signal
is input. Set to “OFF” when these signals are not used.

AUTO2:

 The picture moves around the screen

intermittently, making the picture bigger.

* When a Video or a DVD/HD/DTV signal is input, the

AUTO1 and 2 functions will affect only the moving
picture and will not make the screen smaller or bigger.

INVERSE/WHITE

Use this to set the inverse mode or to display a white
screen.

Example: Setting “INVERSE/WHITE” to “WHITE”

On  “INVERSE/WHITE” of “PDP SAVER” menu, select
“WHITE”.

SEL.

ADJ.

EXIT RETURN

P D P   S AV E R

P E A K   B R I G H T
O R B I T E R
I N V E R S E / W H I T E
S C R E E N   W I P E R
S O F T   F O C U S
O S M   O R B I T E R
O S M   C O N T R A S T

:    1 0 0 %
:    O F F
:   W H I T E
:    O F F
:    O F F
:    O N
:    L OW

Information

 INVERSE/WHITE Settings

OFF:

 Inverse/white mode does not function.

INVERSE:

 The picture is displayed alternately between

positive image and negative image.

WHITE:

 The entire screen turns white.

SCREEN WIPER

When this is set to ON, a white vertical bar moves
repeatedly from the left and of the screen to the right end
at a constant speed.

Example: Setting “SCREEN WIPER” to “ON”

On  “SCREEN WIPER” of “PDP SAVER” menu, select
“ON”.

SEL.

ADJ.

EXIT RETURN

P D P   S AV E R

P E A K   B R I G H T
O R B I T E R
I N V E R S E / W H I T E
S C R E E N   W I P E R
S O F T   F O C U S
O S M   O R B I T E R
O S M   C O N T R A S T

:    1 0 0 %
:    O F F
:    O F F
:    O N
:    O F F
:    O N
:    L OW

Information

 SCREEN WIPER

ON:

 The white vertical bar appears.

OFF:

 Screen wiper mode does not function.

SOFT FOCUS

Reduces edges and softens the image.

Example: Setting “SOFT FOCUS” to “LEVEL2”

On  “SOFT FOCUS” of “PDP SAVER” menu, select
“LEVEL2”.

SEL.

ADJ.

EXIT RETURN

P D P   S AV E R

P E A K   B R I G H T
O R B I T E R
I N V E R S E / W H I T E
S C R E E N   W I P E R
S O F T   F O C U S
O S M   O R B I T E R
O S M   C O N T R A S T

:    1 0 0 %
:    O F F
:    O F F
:    O F F
:    L E V E L 2
:    O N
:    L OW

Information

 SOFT FOCUS settings

OFF:

 Turns the SOFT FOCUS function off.

LEVEL1, 2, 3, 4:

 Activates the SOFT FOCUS setting.

The higher numbers create a softer image.
“SHARPNESS” can not be adjusted  on the
“PICTURE” menu.

Information

 When set to AUTO

Set automatically, as described below.

PEAK BRIGHT:

 100%

ORBITER:

 ON

INVERSE/WHITE:

 OFF

SCREEN WIPER:

 OFF

SOFT FOCUS:

 OFF

OSD ORBITER:

 ON

OSD CONTRAST:

 LOW

Summary of Contents for 50RESI





































Reviews: