NEC 42MP1USERMAN User Manual Download Page 8

Page: 8 / 54

How to Attach Options to the Plasma Monitor

Drawing A

Drawing B

(1.22")

1110

(43.7")

748

(29.5")

(1.22")

(2")

Wall

Ventilation Requirements for
enclosure mounting

To allow heat to disperse, leave space between
surrounding objects as shown on the diagram be-
low when installing.

You can attach your optional mounts or stand to the plasma
monitor in one of the following two ways:

* While it is upright. (See Drawing A)
* As it is laid down with the screen face down (See Draw-

ing B). Lay the protective sheet, which was wrapped
around the monitor when it was packaged, beneath the
screen surface so as not to scratch the screen face.

• This device cannot be installed on its own.

Be sure to use a stand or original mounting

unit. (Wall mount unit, Stand, etc)

* See page 2.

• For correct installation and mounting it is

strongly recommended to use a trained,

authorized NEC dealer.

Failure to follow correct mounting proce-

dures could result in damage to the equip-

ment or injury to the installer.

Product warranty does not cover damage

caused by improper installation.

Summary of Contents for 42MP1USERMAN























































Search results

Summary of Contents for 42MP1USERMAN

Reviews:

Related manuals for 42MP1USERMAN

Brands by name

Popular brands

NEC 42MP1USERMAN, User Manual

Search results

Summary of Contents for 42MP1USERMAN

Reviews:

Related manuals for 42MP1USERMAN

Brands by name

Popular brands