NEC 124i Enhanced Page 132 Manual Download

Page: 132 / 136

0514 - Service Code Setup (Part B)

043

“Tandem Trunking

(Unsupervised

Conference)”

Setting up an Unsupervised Conference from
a Single Line Telephone

044

154

“Voice Mail”

Enabling Conversation Record at a Digital
Single Line Telephone

045

155

“Automatic Call

Distribution (ACD)”

ACD agent logout

046

156

“Automatic Call

Distribution (ACD)”

Enabling ACD Agent Work Time (SLT)

047

157

“Automatic Call

Distribution (ACD)”

Canceling ACD Agent Work Time (ALT)

048

158

“Automatic Call

Distribution (ACD)”

Enabling ACD Agent Off Duty (SLT)

049

159

“Automatic Call

Distribution (ACD)”

Canceling ACD Agent Off Duty (SLT)

050

160

“Automatic Call

Distribution (ACD)”

ACD Recording (SLT)

051

“Abbreviated

Dialing”

Using Personal Abbreviated Dialing from a
Single Line Telephone

052

“Call Forwarding, Off-

Premise”

Enabling Call Forwarding Off-Premise. This
code is currently not used.

053

857

“Park”

Using Personal Park to Park or pick up a call
at an extension.

054

Not used

055

Not used

056

Not used

057

167

“Automatic Call

Distribution (ACD)”

Allows an ACD Agent to log into a group.

058

168

“Automatic Call

Distribution (ACD)”

Allows an ACD Agent to log out of a group.

059

169

“Automatic Call

Distribution (ACD)”

Allows an ACD Supervisor to change an
Agent’s status.

060

170

“Automatic Call

Distribution (ACD)”

Allows an agent to change their own status.

061

882

“T1 Trunking (with

ANI/DNIS

Compatibility”

“Transfer”

Setting up ANI/DNIS routing to the VAU
Automated Attendant. Using the Transfer
feature, this also allows a call to be trans-
ferred to the VAU.

062

886

“E911 Compatibility”

Turning off the E911 alarm ring.

063

Not used

064

Not used

065

867

“Conference”

Allows a CO line in a Conference call to be
retrieved out of the Conference.

Program 0514 - Service Code Setup, Part B

Item Default New Feature Function

4-30

4. Setting Up Flexible

System Numbering

92000hmt06.QXD 4/24/01 10:12 AM Page 30

Summary of Contents for 124i Enhanced









































































































































Search results

Summary of Contents for 124i Enhanced

Reviews:

Related manuals for 124i Enhanced

Brands by name

Popular brands

NEC 124i Enhanced, Manual

Search results

Summary of Contents for 124i Enhanced

Reviews:

Related manuals for 124i Enhanced

Brands by name

Popular brands