7
WARNING:
WARNING:
WARNING:
WARNING:
•
The appliance must be dry before restarting oper-
ation.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
•
Do not use a wire brush or other sharp, abrasive
items.
•
Do not use any acidic or abrasive cleaners.
Maintenance of the hood
Maintenance of the hood
Maintenance of the hood
Maintenance of the hood
•
To clean the surface of the housing, use a mild
detergent and a soft cloth to prevent scratching.
•
The appliance can be used again after everything
has dried properly.
•
If you use your cooker hood in recirculation mode,
you must replace the activated carbon filter regu-
larly (see “Replacing the activated carbon filter”).
Cleaning the aluminum grease filter
Cleaning the aluminum grease filter
Cleaning the aluminum grease filter
Cleaning the aluminum grease filter
WARNUNG: Risk of fire!
WARNUNG: Risk of fire!
WARNUNG: Risk of fire!
WARNUNG: Risk of fire!
Grease residue in aluminum grease filter may ignite
at intense heat. Therefore, clean the grease filter
regularly!
We recommend cleaning the grease filter monthly:
•
Remove the aluminum grease filter by sliding
back the lock in the handle recess, push the filter
down gently and pull out towards the front.
•
Rinse the grease filter in a solution of hot water
and neutral detergent. Soak the filter in it.
•
Then clean with a soft brush, rinse thoroughly with
hot water and allow drying.
•
Alternatively, the grease filter can also be cleaned
in the dishwasher (up to 60°C). Slight discolora-
tion may occur. This does not affect the function
of the grease filter.
Replacing
Replacing
Replacing
Replacing the bulb
the bulb
the bulb
the bulb
WARNING:
WARNING:
WARNING:
WARNING:
Allow the lamps to cool down before replacing the
bulbs. Risk of burns!
Risk of burns!
Risk of burns!
Risk of burns!
..
Lamp specification: LED, 2 x 1 W
Lamp specification: LED, 2 x 1 W
Lamp specification: LED, 2 x 1 W
Lamp specification: LED, 2 x 1 W
•
Carefully remove the lamp with a suitable tool.
•
Pull out the lamp and disconnect the lamp from
the connecting cable.
•
Change the lamp.
•
Reconnect the cable with the lamp.
•
Replace the lamp properly.
