Programmes
19
GERMAN
The
OPTINEB
®
-ir
initially generates aerosol intermittently in order to prevent
surge effects and then works continuously. The intermittent period is pre-set to
2 minutes. The user is not able to change the program parameters.
In order to interrupt aerosol production, please press the
“Start/Stop”
[
A15
] key.
By again pressing the
“Start/Stop”
[
A15
] key, you can re-activate aerosol
production.
ATTENTION
Please note the maximum fill level of the medication to be nebulized. This may
not be greater than 7.5 ml to ensure continuous aerosol production.
8.2.4 Features of the fourth program (P4)
Corresponds to Program P3 but without the initial intermittent time period. The
user is not able to change the program parameters.
8.2.5 Features of the fifth program (P5)
Program P5 corresponds to the
OPTINEB
in the conventional version with the
following features:
Flexibly adjustable inhalation time. Preference settings 1 to 15 minutes.
After expiry of the set time, the program is ended.
The user can re-program the inhalation time within the pre-set range (see
instruction manual for patients).
Setting the inhalation time (timer setting)
Simultaneously press both sensor keys:
Display flashes
Press the left
“Start/Stop”
[
A15
] key:
Adjust value down.
Press the right
“On/Off”
[
A14
] key:
Adjust value up.
WATSON LABORATORIES, INC. , IPR2017-01621, Ex. 1006, p. 19 of 33
