Key Assignment
16
GERMAN
7.0 The meaning of the key assignment and the display screen of the
OPTINEB
®
-ir
ultrasonic nebulizer
When connecting the
OPTINEB
®
-ir
to the power supply, the last used or pre-set
inhalation or nebulization program appears on the display [
A12
] whereby each
program is briefly (for approx. 1 second) illuminated.
7.0.1
To switch on the nebulizer, press the
“On/Off”
[
A14
] sensor key (multifunction
lamp [
A17
] lights up yellow).
7.0.2
To start aerosol production, press the
“Start/Stop”
[
A15
] key, nebulization starts
(multifunction lamp lights up green).
7.0.3
In order to interrupt operation, please press
the
“Start/Stop”
[
A15
] key during the nebulization process. Aerosol
production is stopped (multifunction lamp lights up yellow) and PA (pause)
appears on the display.
In order to restart nebulization, press the
“Start/Stop” key
[
A15
] again.
The display changes from “PA” in the time mode, the multifunction lamp
lights up green and nebulization is continued.
Operation is ended when “En” (End) appears on the display. At the same
time, an acoustic signal sounds when the device is switched off.
The length of the nebulization time (output per minute) can be influenced
by the respective nebulization program or the ventilation parameters set.
7.0.4
After the end of inhalation, switch the device off
“On/Off”
[
A14
]
NOTE
The device is equipped with a multifunction lamp that displays the operation
status:
Multifunction lamp:
Yellow light -
Device ready for operation
Green light -
Device in operation
Red light
-
Malfunction
Infrared sensor
A13
Infrared sensor
A13
Multifunction
lamp A17
On/Off
Start/Stop
WATSON LABORATORIES, INC. , IPR2017-01621, Ex. 1006, p. 16 of 33
