
© 2022
Passion Radio / NEBRA
–
Indoor Hotspot Quick Start Guide
•
•
Preparing Nebra ROCK Pi Indoor Hotspot
•
Configuring Nebra ROCK Pi Indoor Hotspot
•
Warnings
Please remember to follow these important warnings when using your Nebra ROCK Pi Indoor Hotspot:
•
Never power on the ROCK Pi Indoor hotspot without it's antenna connected as this may damage
the unit.
•
Do not place in direct sunlight or on hot surfaces (e.g a heater).
•
The Indoor unit's case is designed to be used indoors, and is not suitable for use outdoor usage.
•
The ROCK Pi Indoor hotspot comes with a 12v power adapter, so don't use that adapter to power
any generic Type-C devices like a mobile phone or anything and vice versa, it will damage the
device.
Preparing Nebra ROCK Pi Indoor Hotspot
Step 1:
First screw in the included antenna into the connector on the back of the hotspot.
If you are using wired connection, plug an ethernet cable in between a router and the ethernet port on the
hotspot.