Page | 6
3.
USB – connect keyboard, mouse and other peripheral devices.
4.
Motherboard audio connectors
5.
GPU display port connectors
6.
Power
SECTION 1.5
NETWORKING
Generally, simply connecting a suitable cable from one of the two Gigabit Ethernet ports on NVG1’s backplate
is all that is required to add it to a
local area network
(LAN). In some settings, additional steps may be
required. You can access the system
Network and Sharing
control panel to accomplish more extensive
configuration tasks. If further help connecting is required, please consult your system administrator.
All that is required to connect the NVG1 to your NewTek production system is running an Ethernet
cable between the NVG1 and a switch or connector on the same network with the desired NewTek
switcher.
SECTION 1.6
LICENSING
1.6.1
OVERVIEW
Your NVG1 comes with 90-day temporary Vizrt License when shipped from the factory. This License is
comprised of a software license key that is paired to a Vizrt Hardlock Dongle housed inside of the NVG1
chassis. Without these items the Viz Engine software would not start. You may use the NVG1 with the
temporary license during the installation and setup of the system.
When you are ready to begin normal operations, please contact NewTek Technical Support to fully register
your system and begin your annual software support contract. At this point, you will also receive your
permanent Vizrt software license.
To contact NewTek Technical Support, please submit at Support Request using the following link:
1.6.2
LICENSE KEY
The permanent license will be sent in an email that includes the 64-character License, a list of the Licensed
Features, and the Hardlock Dongle ID associated with this License. The License and Dongle ID are tied
together, and a License cannot be applied to another Dongle. Any updates or extensions to the Licensed
Features will be done through the application of another License.
Example License
D4 99 B8 95 C3 BD BD 9B C3 EF B6 52 F9 D3 10 FA 9C 66 81 9B 76 BE 23 98 C3 67 C1 7E 30 24 BC 76
1.6.3
APPLYING A LICENSE
1.
The Hardlock Dongle should already be installed inside the NVG1 chassis
2.
Launch Viz Config for Trio Preview by double-clicking on the desktop shortcut
