NDI BirdDog PF120, User Manual

Page: 15 / 44

12
Powering PF120
PF120 can be powered by two ways.
•
PoE+ (Power over Ethernet)
PoE+ is a convenient way to power PF120 as it allows both data and power to be sent through the same
standard Ethernet cable. The network switch must support PoE+ (802.3af) .
•
DC Connection
Located at the rear of the PF120 is a 12VDC connection port. Use only the DC power adaptor (JEITA
type4) supplied with the unit.
WARNING
Do not attempt to manually move the camera head when the device is powered up. Doing so may damage the
camera.
Thermal Management
Although the camera is equipped with a fan, the entire enclosure is designed to dissipate heat. The main processor
is capable of operating up to 100º C / 212º F. Various factors can affect how much heat the camera will produce,
and it is normal for it to feel warm to the touch. In extreme circumstances (a hot day/direct hot sun) it is advised to
power PF120 via DC as this produces less heat than PoE.