NISTA DEVICES GmbH 2013 © All Rights Reserved
17
Connector’s PINs
Description
5
Speaker Connector
6- Ethernet
POE/LAN connection
5VD (5V DC)
External power supply 5VDC 2A input (if no POE applied).
Draw attention on connection polarity: +5V and GND marked on PCB (Figure
6-1)
The External Power Supply does not included in standard IP39-60 package
SEN 1/2 (Sensor 1/2*)
Door status detector.
Also can be used as external Switch button connection. Note: The short circuit
closer type External Switch button can be used for manual door opening
REL 1/2 (Relay 1/2)
Support 30VDC 2A
Internal relays Normally Open and Normally Close status depends on JP1
jumper position.
Audio Out*
Reserved for future release
Note: * - Listed feature support depends on IP Door phone firmware release
Figure 6-2 IP39-60 Connections
Note:
The door electrical Lock requires separate powering follow by door lock manufacture’s requirements
