NISTA DEVICES GmbH 2013 © All Rights Reserved
14
6.2
IP 39-60 Connections
The IP Door Phone can be installed as standalone access control device.
Figure 6-1 shows the terminal locations on the wire connectors provided with the unit. This connector is then inserted
into the mating connector located at the base of the internal PCB. All wiring to the unit shall be attached to the wire
connector.
The Ethernet RJ-45 socket is for the LAN network cable and PoE connection.
The wiring connector has screw connector type terminals. In order to attach a wire, you must insert the stripped end of
the wire into the appropriate wiring connector socket and tighten the terminal screw. This will bring together the wire
connection.
To avoid damage to the IP Door Phone, the external power supply ( if used )
or POE Ethernet should be disconnected from mains prior to connecting
wires to the Door Phone unit.
The External Power Supply does not include in standard IP39-60 package
