manualshive.com logo in svg

NCS Cirrus LT Plus, User Manual, Page: 31 / 160

Share
Download
NCS Cirrus LT Plus User Manual Download Page 31

31

Cirrus LT Plus User Manual v1.2  - Chapter 3

1. 

Connect one end of a DisplayPort cable to the mini DisplayPort of your 
notebook.

2. 

Connect the other end to a projector or display monitor.

Connecting USB devices

You can connect your notebook to other USB devices, such as a mouse, keyboard, 
digital camera, printer, or an external hard disk drive. Connect one end of a USB ca-
ble to the USB port of your notebook, then connect the other end to the USB device.

The USB cable is not included in the package. It is sold separately or it may 

come with your USB device.

USB devices (including, but not limited to, printers, optical drives, and hard 

drives) that do not have their own power sources are not officially support-

ed. Most of these devices tend to draw too much power from the USB port. 

You can still connect these devices to the Cirrus LT Plus. If the device only 

has one USB port, use one of the two PCoIP USB ports on the left side of the 

notebook. If the device has two USB ports (one for enumeration and one for 

auxiliary power), use one PCoIP USB port for the enumeration plug and the 

charging USB port (also located on the left side of the notebook) for the 

auxiliary power plug. Refer to the image below. As a reminder, these USB 

devices that are plugged in may need drivers to be loaded on the remote 

session.

Charging 

USB Port

PCoIP  USB Ports

Enumeration 

Plug

Auxiliary 

Plug

The aforementioned ports are located on the left side of the notebook.

Summary of Contents for Cirrus LT Plus

































































































































































Reviews:

No comments