1-10
Product Overview
Turning the Kiosk ON and OFF
Caution:
The Motherboard ON/OFF Switch is a logic switch only. The AC line voltage
primaries are live at all times when the External AC Power Cable is connected to a
power source. Therefore, disconnect the External AC cable to totally remove power
from the terminal.
Turning ON the Kiosk
1. Plug the External AC Power Cable to an AC power source.
2. If the kiosk does not power up, press the Motherboard Power Switch to turn the
kiosk ON.
Turning OFF the Kiosk
1. Shut down the system application.
2. Shut down the kiosk operating system. At the bottom, left hand side,
select
Start
→
Shut down
.
3. Unplug the External AC Power Cable from the AC power source.
Summary of Contents for SelfServ XK32
