NCR RealPOS 30, User Manual

Page: 99 / 150

Chapter 4:
Operating System Recovery
Introduction
This chapter discusses procedures on how to recover the Operating
System by using the CD ‐ ROM drive. The software is distributed on
bootable CD ‐ ROM media.
In the event your terminal does not have an internal CD ‐ ROM drive,
the 7446 supports the following external CD ‐ ROM drives.
•
Teac USB CD ‐ ROM Drive (2336 ‐ K208)
•
NCR Services: External CDR/W DVD ‐ ROM Drive (603 ‐ 9014774)
It is also possible to perform a BIOS update using a network
connection. Refer to the NCR FitClient Software User ʹ s Guide ,
(B005 ‐ 0000 ‐ 1235) for information about that procedure.
Caution:
When performing an OS recovery from a larger source
image (larger disk) to a smaller destination disk, you must use a special
procedure (see the OS Recovery from a Larger Disk Image section).
Prerequisites
The following are required in order to perform an OS recovery from a
CD.
•
Bootable CD ‐ ROM drive (internal or external)
•
Keyboard