NCR Personas M Series, Operator'S Manual

Page: 43 / 278

Getting Started
How to Unlock and Lock a Controlled Access Electronic Lock
NCR Personas M Series 5887 Operator Manual 1-25
3 Hold the PI key against the key reader of the sub-lock.
4 The LED flashes three (3) times. You have eight (8) seconds to
unlock the sub-lock by turning the locking handle
counterclockwise to release the catch. If the locking handle
cannot be moved, contact the KMC for another access code.
Note: The locking handle cannot be turned before the LED
flashes. After turning, the catch remains in position until the
lock is closed.
5
Open the cheque acceptor side-box door.
Locking the Sub-Lock
1
To lock the sub-lock, if configured, proceed as follows:
1 Close the cheque acceptor side-box door and turn the locking
handle clockwise to hold the catch.
2 Turn the key in the keylock clockwise and remove the key.
3 Hold the PI key against the key reader of the sub-lock until the
LED flashes four (4) times. This indicates the lock is closed.
4 On the master lock, turn the lock dial counterclockwise and
charge the lock until IPI is displayed on the LCD.
5
Hold the PI key against the key reader of the master lock.
6 Take a note of the unique 4-digit close code that is displayed, as
it will be required by the KMC.
7 Close the exterior of the ATM.
Note: Ensure that all the doors and locks on the ATM are closed
and locked before contacting the KMC.
8 Contact the KMC.