NCR Orderman Base Station4 User Manual V01.10
Installation of the NCR Orderman Base Station4
Orderman GmbH (Part of NCR Corporation) 10
3.1.3
Removing/replacing the housing cover
For connection, i.e. for installation, you must remove the housing cover. It is not necessary to
remove the antenna.
3.1.3.1 Removing the housing cover
Press on the housing cover with one hand on the opposite side of the cable outlet.
Lift the housing cover with a finger at the cable outlet.
Fig. 6: Removing the housing cover
rderman
Cable outlet
3.1.3.2 Replacing the housing cover
To install the housing cover, press the opposite side of the cable outlet into the holder for the
housing.
Then press the housing cover (cable outlet side) downward until it latches into place.
Fig. 7: Replacing the housing cover
Cable outlet
