NCR Orderman Base Station4 User Manual V01.10
Installation of the NCR Orderman Base Station4
Orderman GmbH (Part of NCR Corporation) 16
3.2.3
Installation in a false ceiling
For installation in a false ceiling, clips are provided to compensate for the wedge profile of the
housing.
The following steps must be followed:
Press both distancing strips as shown in the figure until the clips click into place in the counter
surface.
Break or cut the two retaining clips from the mounting plate with a knife.
Warning:
Breaking off or cutting off the retaining clips may result in sharp edges
(
risk of injury
).
Fig. 14: Installation in a false ceiling
Mounting plate
Retaining clips
Distancing strips
Fig. 15: Installation in a false ceiling
Housing
False ceiling
Hole in a false ceiling
Antenna
Distancing strip
Mounting plate
Ø 35 mm
