Programming Your 7890 Scanner
RS-232 Parameters - 2
User’s Guide
5-79
You can enter the RS-232 Parameters - 2 programming
parameters in one of two ways. One is to enter all the
parameters, the other is to enter only specific
parameters by using parameter shortcuts.
Enter all Parameters
1
In the Base Programming state, scan the Hex 2 tag
followed by the Hex 1 tag.
2
Disable the BCC Option by scanning the Hex 0,
enable it by scanning the Hex 1.
3
Select the Interface Control by scanning the
appropriate Hex tag (Hex 0 through Hex 3).
4
Select the Check Digit option by scanning the
appropriate Hex tag (Hex 0 through Hex 3).
5
Select the VLI And Bit 6 EOM function by scanning
the appropriate Hex tag (Hex 0 through Hex 3).
6
Scan the Hex 0 tag to disable Retransmit On ACK
Timer Expiration, or the Hex 1 tag to enable it.
End of this procedure - program returns to Base
Programming state (long then short beep).
■
Entering the
Program
Summary of Contents for 7890
