![NCR 7350-K160 Kit Instructions Download Page 39](http://html1.mh-extra.com/html/ncr/7350-k160/7350-k160_kit-instructions_3732513039.webp)
7350 3-Bag Bagwell Upgrade
1-35
Routing Cables
To route cables when installing a new Bagwell follow these steps:
Note:
If a new Bagwell is installed to a No-Bag unit, refer to
on page 38 first for additional steps.
Note:
Use the new pre-installed USB Power Cable only when installing a new Bagwell
to a No-Bag unit. If not, reuse the existing USB Power Cable of the previous Bagwell.
1. Retrieve the USB Power Cable from the Core and route to the Scale Controller
through the smaller opening of the Bagwell frame as shown in the image below.