NCR 7197 II SERIES, Owner'S Manual

Page: 97 / 308

7197 Series II Owner’s Guide Chapter 6: Commands
August 2011 72
By Function
All items in BOLD are new or have additional functionality when compared to the 7193.
Printer Function Commands
Code (Hexadecimal) Command Page
10 Clear Printer 81
19 or 1B 69 Perform Full Knife Cut 82
1A or 1B 6D Perform Partial Knife Cut 82
1B 07 Generate Tone 83
1B 40 Initialize Printer 83
1B 63 34 n Select Sensors to Stop Printing 84
1B 63 35 n Enable or Disable Panel Buttons 84
1B 70 n p1 p2 Generate Pulse to Open Cash Drawer 85
1D 56 m Select Cut Mode and Cut Paper 85
1D 56 m n Select Cut Mode and Cut Paper 85
1F 74 Print Test Form 86
Vertical Positioning and Print
Code (Hexadecimal) Command Page
0A Print and Feed Paper One Line 87
0D Print and Carriage Return 87
14 n Feed n Print Lines 88
15 n Feed n Dot Rows 88
16 n Add n Extra Dot Rows 89
17 Print 89
1B 32 Set Line Spacing to 1/6 Inch 90
1B 33 n Set Line Spacing 90
1B 4A n Print and Feed Paper 91
1B 64 n Print and Feed n Lines
92
1D 50 x y Set Horizontal and Vertical Minimum Motion
Units 92