NCR 7156, Operating And Troubleshooting Manual

Page: 10 / 36

2 Chapter 1: 7156 MICR Operation
Select a MICR encoded bank check or similar document. Make sure
that the test document is of high quality and fits the specifications
for the printer.
4. Enable MICR reading.
MICR reading is normally initiated on command by the host
system. For test purposes, MICR may also be enabled at the printer
using a diagnostics routine. To enable MICR reading by way of
self-diagnostics, do the following:
•
Set the DIP switches as shown: (Record the current settings
first.)
Switch 1 2 3 4 5 6 7 8
OFF ON OFF OFF OFF OFF ON Don’t
Care
•
Check that there is sufficient receipt paper loaded and that both
the top cover and the front cover are tightly closed.