NCR 5965, User Manual, Page: 39 / 91

3
Chapter 3:
Touch Screen Calibration
Note:
This chapter discusses calibration procedures using Hampshire, Version 6.31gs.
Installing and Calibrating the Touch Screen
Be sure to observe for the following Touch Screen calibration guidelines:

Calibrate the touch screen as part of the installation process.

Recalibrate the touch screen when the system is installed at its final location.

Recalibrate whenever the terminal is moved to a new location.

Recalibrate the touch screen anytime the system has been disassembled for servicing.

Download the Calibration software from the NCR website.
http://www.ncr.com
a. At this site, select
Support
.
b. Under Related Items, Services; select
Drivers and Patches
→
Retail Support
Files
→
NCR RealPOS and SelfServ Peripherals
→
Displays
→
5965
.
c. Download the Microchip Driver.
Installing the Driver
Note:
If you have a previous version of another touch screen driver loaded on your system
you must completely remove it using the Control Panel
Add/Remove
program before
continuing with this installation process. Even though there is a message that it is not
necessary do perform a
System Restart
after removing the old driver.
1. Extract the driver installation files into to a working directory on the POS terminal.
2. Run the
Setup.exe
program from this directory.
3. Welcome screen >
Next
4. License Agreement screen > Accept,
Next