X350/X550 User Manual
Page 40
•
Delay until shutdown (seconds)
: the default amount of time after a shutdown
command is issued until the shutdown occurs. You can set the number of
seconds.
•
Disable Send Broadcast Message
: sets whether or not the administrator has
disabled broadcast messages from the NComputing vSpace icon in the Windows
System Tray so a user who cannot access the vSpace console cannot use the
function of sending a broadcast message. You can set this either on or off. If
“off” it is possible to send broadcast message from vSpace console. Go to Local
settings in the vSpace console
right click on the station number
send the
message.
•
Disable console in context menu:
when enabled, the user cannot launch the
console from the NComputing vSpace icon in the Windows System Tray.
•
Do not display last user name:
when enabled, the user name field in the
Windows logon screen will not be auto-populated with the information from the
last user to have logged into a session on that station.
•
Support WTSAPI32 Interface
: (Option may be disabled in some versions of
vSpace.) Controls whether support for the WTSAPI32 application interface is
turned on or off. This setting is intended to support certain management
applications.
•
Administrator Password
: whether an administrator password is set. You can
change the administrator password properties.
•
Autologon on the Host Station
: whether the host PC is set to start without the
Windows logon screen and what username and password to use to bypass it.
You can enable or disable autologon and define the username and password.
The "Serial Numbers" item shows a list of serial numbers of terminals that have
connected to the terminal services software. For each serial number, it shows the
number of licenses required for that terminal, the station number (if available), whether
or not it is registered, and the location of the serial number record.
Summary of Contents for X350
Page 32: ...X350 X550 User Manual Page 32 ...
Page 42: ...X350 X550 User Manual Page 42 ...
