NComputing X350, User Manual

Page: 18 / 45

X350/X550 User Manual
Page 18
Product Registration
The X350/X550 PCI card contains an embedded hardware license which allow it to
support up to five/three access devices. When first installed, the X350/X550 starts a trial
license which permits you to use up to five/three attached access devices for the next 30
days. Until you register, sessions are limited 60 minutes and a reminder info box like the
one shown below will be displayed at least once a day on every user station. If you fail
to register the X350/X550 card with NComputing (online or offline) within the 30-day trial
period, the PCI card will cease to function.
Reminder box displayed daily on each
user station attached to an unregistered
PCI card. Warning box that 60 minute session limit
has been reached that appears on user
station prior to station shut down.
Allowing a card’s trial license to expire will not prevent you from later registering the
card. You can always launch the vSpace Registration application from the PC’s main
screen, via
Start > All Programs > vSpace > vSpace Registration
Then perform either online or offline registration, and full PCI card functionality will be
delivered once the card is successfully registered with NComputing.
NOTE: If you have two matched X-series cards installed in the system, the vSpace
Registration application will register both cards at the same time.