NComputing OfficeStation L110, User Manual

Page: 29 / 87

2-12
Software Installation and Operation
Viewing the monitor connected to the OfficeStation terminal, the Setup window will appear. In the “Network” tab, check “Get
Dynamic IP address”.
In the "TS Options" tab, "Autodetect" would be activated as the default setting for automatic connection to the Host PC. If it is
not connected properly, or if you want to run the “Fail-over” function, click the “Enable / Disable” after selecting. TS 2(or TS 3)
and inputting the IP address.
or