SECURITY
NCM
PARIS MAX 36V
2.3 Transportation
Transport by car
Batteries should be removed from the bicycle during transport by car, as they can be damaged by excessive and repeated shocks or by foreign objects striking
the bicycle at high speed.
Please remove the batteries and keep them inside the vehicle during transportation.
Remove the front wheel for transportation
- Open the quick release lever (1) and loosen the axle nut (2) a couple of turns.
- Remove the front wheel (3) from the fork downwards.
two
4
3
one
Install the front wheel
4
- Insert the front wheel (3) into the outlets (4) of the fork.
- Tighten the axle nut (2) and close the quick release lever (1).
- The lever must point upwards (and aligned with the fork to avoid them snagging) and must be closed with considerable pressure.
WARNING:
● To avoid any danger, after installing the wheel, check the brake system before riding the bicycle.
● If the quick release lever has not been fully closed, it can be fully opened again easily. This can cause the wheel to come off the bike, causing a serious fall or
damage to the bike. To ensure your wheel is properly in place, the quick release lever must offer considerable resistance when closed manually and should
always be fully closed before riding the bike.
2.4 Keys
Each NCM electric bike comes with two copies of the battery fixing key. Bicycles with ring locks come with additional keys (not the same key as the battery).
On-board charging of the battery will likely lead to infrequent use of the battery fixing key; it is required for maintenance and repair, however, keep this in
mind when storing the key.
● Make sure you always have at least one spare key.
● Keep spare keys in a safe place for repair, maintenance, and emergencies.
● Please bring the key with you when you go to your NCM dealer for maintenance or repairs.
06
