Model 6700 Family User’s Manual
19
The Calibration (CAL) Mode menu lets you
calibrate your scale. The items in the calibration
menu are as follows:
POUNDS/KILOGRAMS (LBS or 1000 Gr)
–
Selects the unit of measure of your calibration
test weights (lb or kg).
CAPACITY (9.995, 15.005, 30.01, 60.02 etc.)
–
Select the capacity of the scale.
Follow these steps to calibrate the scale. Refer to
Figure 3.
1.
From the DIAG display, press the
ZERO
key
until
CAL
is displayed, or from the normal
weighing mode, move Switch 1 to the Menu
mode or OPEN position. Press the
ZERO
key until
CAL
is displayed.
2.
Press the
TEST
key…
50 H
or
60 H
is displayed. This is the AC
line frequency.
3.
Press the
ZERO
key to toggle between the
choices. When the choice you want is
displayed, press the
TEST
key…
That choice is accepted and
LB
or
KILO
is displayed.
4.
Press the
ZERO
key to toggle between the
choices. When the choice you want is
displayed, press the
TEST
key…
The scale capacity is displayed.
(Example: 9.995)
If a different capacity selection is desired,
press the
ZERO
key to scroll through the
choices.
Calibration Mode
Step-by-Step
Instructions
for CAL Mode
