Model 125X MiniPrinter Series User’s Manual
20
Ext Ch Set
Online/Offl ine
The choice to use the
extended character
set is available only
when 8 data bits are
chosen.
Print Ready
SET CLOCK
Choices:
YES -
voltage will be in a low state until the unit is
busy then voltage level goes high.
NO -
voltage will be in a high state until the unit is
busy then voltage level goes low.
ONLINE/OFFLINE
is next.
Choices:
YES -
enables the rocker switch to turn the printer
offl ine.
NO -
disables the ONLINE/OFFLINE ability.
EXT CH SET
is next. This stands for Extended Char-
acter Set.
Choices:
YES -
Allows you to use hexidecimal numbers
above 80 (true only for 8 data bits.)
NO -
Disables the Extended Character Set ability.
PRINT READY
is next.
Choices:
YES -
Prints
Ready
upon power up.
NO -
Disables
printing
Ready
WARNING -
If you choose
NO
, then you will
need to hold the left side of the rocker switch
down for 4 to 6 seconds to access the setup
menu. Begin timing when you connect power to
the unit and the red light comes on. The paper
feed motor does not run upon power up when
Ready
is disabled.
The next item in the Setup Menu is
SET CLOCK.
With the printer in the setup menu and with
SET
CLOCK
as the last item printed, if you press
OK
(right side) the printer will print the following:
The printout shows the year currently in memory.
The
0
is reversed (white on black) to show the posi-
tion of the cursor. This is the number which will be
incremented if
NEXT
(left side) is pressed. If the
number is correct press
OK
(right side) and the fol-
lowing is printed: