46
ASSIGNING A LOCO TO A CAB
(shortcut = PROG 2 )
This selection passes a loco or consist from one cab to another. This is especially
useful when the other operator is a novice or has a Basic Cab. The locomotive/
consist is passed to the assigned cab and the locomotive/consist controlled by the
other cab is passed back to the original cab. In effect the locomotives controlled by
the cabs are “swapped”. This way you will not accidentally ‘lose’ a locomotive in the
system.
ASSIGN THE LOCO
Enter the loco/consist number you want to assign to another cab, then press
ENTER. If you want to assign the loco you are currently running just push ENTER.
ASSIGN 02:00PM
ASSIGN 02:00PM
ASSIGN 02:00PM
ASSIGN 02:00PM
ASSIGN 02:00PM
WHICH LOCO: _003
WHICH LOCO: _003
WHICH LOCO: _003
WHICH LOCO: _003
WHICH LOCO: _003
ASSIGN THE CAB
You need to know the address of the cab you want to ‘receive’ the loco you are
assigning. Enter the Cab number then press ENTER.
LOC:1234 02:00PM
LOC:1234 02:00PM
LOC:1234 02:00PM
LOC:1234 02:00PM
LOC:1234 02:00PM
TO WHICH CAB? _
TO WHICH CAB? _
TO WHICH CAB? _
TO WHICH CAB? _
TO WHICH CAB? _
This operation is also useful to transfer an old style consist to a smaller cab without
the capability of setting up consists.
SET THE SYSTEM CLOCK
(shortcut = PROG 3)
This allows the operator to start/stop the clock, set it, choose 12 or 24 hour
operation, or change the fast clock ratio.
STOPPING THE CLOCK
Press 1 to stop the clock, press ENTER to leave the clock running and continue with
clock programming. If the clock is already stopped, you will be prompted to start it.
STOP? 02:00PM
STOP? 02:00PM
STOP? 02:00PM
STOP? 02:00PM
STOP? 02:00PM
ENTER=NO 1=STOP
ENTER=NO 1=STOP
ENTER=NO 1=STOP
ENTER=NO 1=STOP
ENTER=NO 1=STOP
SETTING 12 or 24 HOUR MODE
Press 1 for 12 hour mode, press ENTER for 24 hour mode.
SET TIME 02:00PM
SET TIME 02:00PM
SET TIME 02:00PM
SET TIME 02:00PM
SET TIME 02:00PM
1=12HR 2=24HR _
1=12HR 2=24HR _
1=12HR 2=24HR _
1=12HR 2=24HR _
1=12HR 2=24HR _
ENTERING THE HOUR
Enter the starting hour in 24 hour format. For times in the A.M. use 0 to 11. For times
in the P.M. use 12 to 23. Press ENTER.