36
PROGRAMMING
PROCEDURES
ACCESSING PROGRAMMING MODES
To access the various programming modes, press the PROG/ESC key. The
following messages will be displayed for each press of the PROG/ESC key. When
the desired mode is displayed, press the ENTER key to enter that mode. To quickly
get to a programming mode, press the PROG/ESC key and then press the number
of the screen. If you have pressed the PROG/ESC key by mistake, or want to exit
out without having to press the PROG/ESC key several times, press EXPN.
Refer to the following sections for the individual programming instructions. To escape
from any programming session press the PROG key.
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
PROGRAM ON MAIN
PROGRAM ON MAIN
PROGRAM ON MAIN
PROGRAM ON MAIN
PROGRAM ON MAIN
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
ASSIGN LOCO->CAB
ASSIGN LOCO->CAB
ASSIGN LOCO->CAB
ASSIGN LOCO->CAB
ASSIGN LOCO->CAB
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SET SYSTEM CLOCK
SET SYSTEM CLOCK
SET SYSTEM CLOCK
SET SYSTEM CLOCK
SET SYSTEM CLOCK
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
USE PROGRAM TRK
USE PROGRAM TRK
USE PROGRAM TRK
USE PROGRAM TRK
USE PROGRAM TRK
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SET CMD STATION
SET CMD STATION
SET CMD STATION
SET CMD STATION
SET CMD STATION
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SET CAB PARAMS
SET CAB PARAMS
SET CAB PARAMS
SET CAB PARAMS
SET CAB PARAMS
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
PROG ACCESSORIES
PROG ACCESSORIES
PROG ACCESSORIES
PROG ACCESSORIES
PROG ACCESSORIES
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
PROGAM MACROS
PROGAM MACROS
PROGAM MACROS
PROGAM MACROS
PROGAM MACROS
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
BROWSE CONSISTS
BROWSE CONSISTS
BROWSE CONSISTS
BROWSE CONSISTS
BROWSE CONSISTS
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
SEL MODE 02:00PM
PROGRAM SIGNALS
PROGRAM SIGNALS
PROGRAM SIGNALS
PROGRAM SIGNALS
PROGRAM SIGNALS
To program locomotive decoders on
the main (OPS mode) press ENTER.
To assign a locomotive/consist to a
Cab press ENTER. [2]
To start, stop, or set the System Clock
press ENTER [3]
To program on the program track press
ENTER. [4]
To set command station parameters
press ENTER. [5]
To set the Cab parameters press
ENTER. [6]
To program accessory decoders on the
main press ENTER. [7]
To setup macros (routing through
turnouts) press ENTER. [8]
To browse through all the advanced
consists in the system, press ENTER [9]
To program signals on the main press
ENTER. [10]