19
5
Installing the Security Device
Both models have a rectangular security cover located next to the
keyboard connector. This is where the security device is located once
the cover is removed. The security device can be used with or without
the mounting bracket.
If you are using the optional mounting bracket and are going to use
the security device with it, do step one of this procedure and then go to
the next part in this section “Installing the Mounting Bracket.” You do
not have to return to this section.
1. To remove the security cover,
insert a medium sized flat
blade screwdriver into the
bottom of the slot.
2. Gently pry out the security
cover.
3. Insert the security device into
the slot so that the center of
the device lines up with the
screw hole in the chassis.
4. Insert an M2.5 machine screw
(supplied) through the center
of the security device and into
the hole.
5. Tighten down the machine
bolt.
6. To secure the unit, insert a lock
or cable through the outer hole
in the security device.
N C DN C D
N C DN C D
Xxx
Security
Cover
Pry
Here
M2.5
Pan-Head
Screw
Security
Device
Lock
