-Clean Inside the Printer Using Cleaning Kit
Clean inside the printer using the cleaning kit every month or every 1000 cards
Make sure to follow the instructions provided below on a regular basis as dusts
or contaminants may affect the printing quality or damage the parts.
① Cleaning Kit & Use
1) CR80 Cleaning Card:
Use for cleaning the printer path, roller, and feeding roller.
2) Long T Cleaning Card:
Use for cleaning the printer path, roller, and feeding roller.
3) Alcohol Swab:
Use for cleaning the interior case and sensor.
② Clean the Printer Using CR80 Cleaning Card / Long-T Cleaning
Card
CR80 Cleaning Card : insert the card to the Single Card Slot.
Long-T Cleaning Card : remove the Input Hopper and insert the card through the tray.
Using these cards in any other way may cause an error.
Caution
Insert the CR80 Cleaning Card to the Single Card Slot as shown in the picture.
1) Check the Proper Use of CR80 Cleaning Card / Long-T Cleaning Card
CR80 Cleaning Card
68
Insert one third of the Long-T Cleaning Card to the card tray as shown in the picture.
(Make sure to remove the Input Hopper before inserting it.)
2) Not Connected to a PC: User Mode
1. Open the Top Cover and remove the ribbon. Close the cover.
2. Press the
“EJECT”
button located in front of the printer to eject any card
inside the Single Card Slot. For the cards in the Input Hopper, open the
cover to remove them.
STAND-BY MODE
USER MODE
3. Insert the cleaning card to the feeding slot
(Single Card Slot, Input Hopper).
4. Hold down both the
“EJECT”
button and
“RIBBON SET”
button together
until the LCD display indicates that the printer is in
“USER MODE”.
Long-T Cleaning Card
69
JAVELIN DNA User Guide Manual
Summary of Contents for Javelin DNA
Page 1: ......
