-Print Self-Test Card
1. Turn on the printer connected to a PC.
① If Connected to a PC
2. Load the ribbon and press the
“RIBBON SET”
button.
3. Insert a single card into the slot or load it on the Input Hopper.
② If Not Connected to a PC: User Mode
1. Turn on the printer (there is no need to connect it to a PC).
2. Insert a single card into the slot or load it on the Input Hopper and load
the ribbon.
STAND-BY MODE
USER MODE
3. Hold down both the
“EJECT”
and
“RIBBON SET”
buttons until
“USER
MODE”
is indicated on the LCD display.
5.
“Self Printing”
is indicated on the LCD display as a test card is printed so
that you can check the printing quality.
4. Right-click
“NBS Technologies Javelin Driver→ Printing preferences→ Control
tab→ Direct Printer Control → Self Printing”
64
65
JAVELIN DNA User Guide Manual
DIAGNOSIS
4. Hold down the
“RIBBON SET”
button in the USER MODE, and go
into the
“1. DIAGNOSIS”
menu.
5. Hold down the
"RIBBON SET"
button in the
"DIAGNOSIS → 1. SELF
PRINT"
menu to start printing a test card.
SELF PRINTING
SELF PRINTING MODE
Summary of Contents for Javelin DNA
Page 1: ......
