55
Embosser Specifications
Emboss ISO
7811-1
Emboss printing
type capacity
54 characters (standard) 80 characters at maximum (Including indent
printing types.)
Emboss printing
character type
Alphabet (10 CPI) 26 characters “A to Z”
Number (10 CPI) 10 characters “0 to 9”
Number (7 CPI) 10 characters “0 to 9” (OCR-7B)
Symbol (10 CPI) 8 characters “
－
/ . ' , ( )
＆
”
Possible emboss area
Lower limit
：
(5.1
㎜
from lower end of the card to character center line)
Upper limit
：
(21.4
㎜
from lower end of the card to character center line)
Left limit
：
(7.7
㎜
from left end of the card to character center line)
Right limit
：
(75.5
㎜
from left end of the card to character center line)
Emboss cross-feed pitch
1/7inch
（
Up to 19 digits can be embossed
）
1/10inch
（
Up to 27 digits can be embossed
）
Indent printing
character type
10 characters “0 to 9” (OCR-B (14CPI)) (*Option Reverse italic)
Indent Film Detection
Film-end detection
Possible Indent area
Lower limit
：
(15.2
㎜
from lower end of the card to character center line)
Upper limit
：
(37.8
㎜
from lower end of the card to character center line)
Left limit
：
(3.7
㎜
from left end of the card to character center line)
Right limit
：
(81.3
㎜
from left end of the card to character center line
）
Tipper Foil color
Silver, (Gold)
Tipping Foil Detection
Foil-end detection
Tipper heater
warm up time
Within 6 minutes
Encoder Specifications
Magnetic Stripe Encode ISO 7811-2/-6(Track 1, 2, 3: Hi-Co &Lo-Co )
IC Encode
ISO 7816 , EMV Level 1 and PBOC 3.0
Contactless IC Encode Mifare® standard, ISO-14443A&B
Printer Specifications
Print Mode
Color
（
Dye-sublimation
）
, Mono
（
Thermal transfer
）
Print Side
Dual side
Print resolution
300dpi
Restriction of Usable card
Cannot print on not flat area such as signature panel or hologram sheet.
