Continued from Product Installation
Connect the supplied power cord to the inlet on the back.
Connect the end of the power cord to the switchboard and use it, or use an appropriate plug to install it.
Plug is not included. Please prepare separately the plug which satisfies the laws and regulations of the
country/region where this product is installed.
Card Handling
L
N GND
1 Brown Blue
Green/
Yellow
2 Black White Green
The wire covering color is either 1 or 2.
When you are touching the cards, it is recommendable for you to wear gloves. If finger
prints contaminate the surface of the card, it may cause bad print quality. To carry a card it
is recommended that it is held by its edges.
Do not put or store cards in a dusty place, a place with high temperatures or near electric
appliances that may emit a strong magnetic field (such as a mobile phone and monitor). It
may cause deformation of cards or deletion of magnetic data.
Caution
Do not bend the cards or damage the magnetic strip. It may interfere with proper reading
of magnetic information.
Install in a place more than 10 cm away from the side wall.
When connecting a cable, be sure to insert it as far as it will go and lock if a lock function is
equipped.
Use the supplied power cord only for this machine.
Power supply connection of this product should be done by a technician with necessary
knowledge and qualification. It may cause electric shock or fire.
Caution
L
N
GND