10
2 Overview
2.3 Button and Switch Operation
Remove the rubber cover on the top of the unit and operate using
the buttons and switches on the board to rotate the output shaft,
switch between wired and wireless communication, and make
other network settings.
■A button (CW), B button (CCW) operation
The output shaft will rotate while the button is pressed.
Warning
Do not wire or operate with wet hands.
It may result in electric shock or
failure.
・
Never touch the other components on the PCB.
This may result in a fault.
・
Do not use in places where static electricity is generated.
This may result in
a fire or a fault.
Unit Top
Output Shaft
Rotational Direction
CW Direction (Button A)
CCW Direction (Button B)
Output
Shaft
RUN
232C
RF
A
B
Caution