9
2 Overview
No.
Name
Function
Reference
1
Antenna
Antenna for wireless communication.
> P.16
2
Display LED
Regular: Green (Standby: Illuminated,
Moving: Blinking)
-
Error: Red (Error occurred: Illuminated,
Fault: Blinking)
Setting: Orange (Network settings: Illuminated)
3
External I/F
connector
High-density D-sub 15-pin male connector.
Used for wired communication, limit sensor
connection, or for connecting a forced travel switch.
> P.22
4
Power Cable
Cable for making connections to power.
24 V (Wiring color: Red), 0 V (Wiring color: Black)
> P.21
5
Nameplate
1
Rated Voltage
5
Part No.
-
2
Rated Current
6
Serial No.
3
Rated Torque
7
QR Code
4
Rated Rotational Frequency
-
6
Rubber cover
Remove to access the buttons and switches
on the PCB.
-
7
A button (CW)
Output shaft rotates clockwise as seen from
the output shaft side.
> P.10
8
B button (CCW) Output shaft rotates counter-clockwise as
seen from the output shaft side.
9
RF/232C
Switch
RF:
Controls the unit via wireless
communication.
> P.11
232C: Controls the unit via wired
communication.
10
RUN/SET
Switch
RUN:
Puts the unit into regular operation
mode, enabling operation. The switch
should be switched to regular mode.
SET:
Puts the unit into wireless unit
search standby state for wireless
unit registration mode. Contact
us if communication or operation
is interrupted after changing the
network settings.
