NBE Brawn mixer BTO Series, Operation And Maintenance Manual

Page: 7 / 40

BTO-S
ERIES
O
PERATION
& M
AINTENANCE
M
ANUAL
12838 Stainless Drive, Holland, MI 49424 Phone: 616/399-5600 Fax 616/399-3084

Copyright 2018 BRAWN Mixer www.BRAWNMIXER.com Page 1 of 9
11/27/2018
CONTENTS
Mixer Installation / Assembly / Dimension Drawings
Safety ............................................................................ 1
Customer Service Contact ............................................ 2
Initial Inspection ............................................................. 2
Installation .................................................................. 2-3
Shaft and Impeller Assembly ......................................... 3
Start-Up ...................................................................... 3-4
Electric Motors ............................................................ 4-6
Maintenance / Lubrication .......................................... 6-8
Storage .......................................................................... 8
Warranty ........................................................................ 9
SAFETY
The precautions mentioned in this manual are not
intended to cover all hazards that may exist in a plant or
on this equipment. Using safety mechanisms require the
constant attention of everyone in the vicinity of this (or
any) equipment.
A plant and the related equipment are only as safe as the
personnel are safety-minded. Proper equipment
maintenance and the use of personal safety devices will
contribute as much toward safety as will any number of
mechanical safety devices.
WARNING

To assure maximum safety, optimum performance,

and to gain knowledge of the product, it is essential
that you or any other operator of this equipment read
and understand the contents of this manual before
the mixer is operated.

Installation, operation and maintenance must be
performed only by qualified personnel.

Do not operate this equipment unless all safety
devices are installed and working properly. Check
all devices prior to starting the equipment.

Disconnect and lock out electrical power before
installing or servicing the mixer.

Do not touch rotating parts (keep all guards and
safety devices installed while operating).

Develop a safety checklist for this equipment and
perform regular maintenance to ensure continued
and proper operation.

Do not make any field changes or modifications
without reviewing the change with your BRAWN
sales representative or the BRAWN Customer
Service Department.
CUSTOMER SERVICE
Mixer Model #.............................................
BTO-SERIES
Mixer Serial # _________________________________
Contact:

Customer Service ............................... 616/399-5600

E-Mail ................................. sales@brawnmixer.com
BTO SERIES MIXERS
BRAWN NAMEPLATE