NBB Planar-D1, Operating Instructions Manual

Page: 32 / 66

32
Planar
®
-D1 / Compact-M2 R7
.
Right
Wrong
Right
Wrong
Technical data
Compact receiver with optional 12 V or 24 V DC supply. There are 7 programmable relays
available as well as a forcibly actuated emergency stop relay. The antenna is available both
internally and, if desired, externally with an extension cable. An interface with RS232 is
available.
– Voltage: See connection diagram (page 28)
– Small, compact and robust housing design
– Protection class IP 65
– CE
– Individually adapted solution according to specifications
Receiver Compact-M2 R7
Receive frequency range See nameplate
Data security
Addressing each receiver by a separate,
unique combination >16 million options
Safety
EMERGENCY STOP with self-test,
Restart lockout in the event of a faulty EMERGENCY STOP relay
Contact load of EMERGENCY STOP relay Max. 4 A, 12 V / 24 V DC
Common Max. 4 A
Power consumption
<4 VA / 12 V DC; < 3 VA / 24 V DC,
depending on the number of active relays
Supply Please refer to the technical documents.
Protection class IP 65
Operating ambient temperature – 20 °C to + 70 °C
Weight Ca. 800 g
Measurements (L x W x H) 114 x 60 x 173 mm
Mounting instruction
– Mount the receiver only vertically to the external wall of the switch cabinet and make
sure that the antenna protrudes above the wall.
– Make sure that the antenna is not partially or completely shielded by metal parts.
– For installation in the cabin or switch cabinet, the antenna is installed on the outside
using the extension cable and attached with the mounting bracket as horizontal as
possible at a distance to the metal parts to be shielded.
– The antenna should always be mounted in a position so that it remains visible every
time the location of the transmitter is changed.
Receiver Compact-M2 R7
Installation for rotating tower crane Mount antenna with extension cable horizontally for rotating tower crane