background image

Important Safety Information

CAUTION

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

The lightning flash with arrowhead symbol, within 
an equilateral triangle, is intended to alert the user 
to the presence of uninsulated “dangerous volt-
age” within the product’s enclosure that maybe of 
sufficient magnitude to constitute a risk of electric 
shock to persons.

The exclamation point within an equilateral triangle 
is intended to alert the user to the presence of impor-
tant operating and maintenance (servicing) instruc-
tions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC 

SHOCK,  DO  NOT  EXPOSE  THIS  APPARATUS  TO  RAIN  OR 
MOISTURE.
WARNING: This product contains lead, a chemical known 

to the State of California to cause cancer and birth defects 
or other reproductive harm. Wash hands after handling.

 

1.  Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean only with dry cloth.
7.  Do not block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions.

8.  Do  not  install  near  any  heat  sources  such  as  radiators, 

heat registers, stoves, or other apparatus (including am-
plifiers) that produce heat.

9.  Do  not  defeat  the  safety  purpose  of  the  polarized  or 

grounding-type  plug.  A  polarized  plug  has  two  blades 
with one wider than the other. A grounding type plug has 
two blades and a third grounding prong. The wide blade 
or the third prong are provided for your safety. If the pro-
vided plug does not fit into your outlet, consult an elec-
trician for replacement of the obsolete outlet.

10.  Protect the power cord from being walked on or pinched 

particularly  at  plugs,  convenience  receptacles,  and  the 
point where they exit from the apparatus.

Page 2 

Naxa Electronics

Summary of Contents for NRC-180

















Reviews: