www.naxa.com
Page 31
• Network notification: By default, when Wi-Fi
is on, you receive notifications in the Status bar
when your device detects an open Wi-Fi network.
Uncheck this option to turn off notifications
• Scanning always available. Enable to allow
Google’s location service and other apps to scan
for networks, even when Wi-Fi is off. This allows
for a better experience with apps that rely on
location data.
• Keep Wi-Fi on during sleep: To conserve mobile
data usage, your device stays connected to Wi-Fi
when the screen goes to sleep.
Tap this option to change this default behavior:
either to stay connected to Wi-Fi only when the
device is connected to a charger (when battery life
isn’t a problem), or to disconnect from Wi-Fi dur-
ing sleep.
• Avoid poor connections: Don’t use a Wi-Fi net-
work unless it has a good Internet connection.
• Install certificates: Select a Wi-Fi certificate to
install, if available.
• Wi-Fi Direct: Connect to another Wi-Fi direct
device.
• Wi-Fi optimization: Minimize battery usage when
Wi-Fi is on.
• WPS push button: Use with the WPS button on
your router, if available.
• WPS Pin Entry: Generates a PIN to use with your
Wi-Fi router, if necessary.
This screen also displays the following information:
• MAC address: The unique Media Access Control
(MAC) address of your tablet when connected to a
Wi-Fi network.
• IP address: The Internet Protocol (IP) address as-
signed to the device by the Wi-Fi network you are
connected to (unless you used the IP settings to
assign it a static IP address).
Related settings
Settings > Wireless & networks > Wi-Fi
Settings > Wireless & networks > Data usage
