Naxa NDS-1236, Instruction Manual

Page: 2 / 11

2
WARNING
1. Read these instructions.
2. Guard this manual.
3. Obey all alerts.
4. Follow all instructions.
5. WARNING: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
Do not store and operate this product near liquid.
6. Clean only with dry cloth.
7. Not store and not operate this product near any heat sources such as radiators and heat regis-
ters, stove or other appliances (including amplifiers) that produce heat. Keep this product in a well
ventilated place.
8. Not ignore the safety purpose of the polarized or grounding plug. A polarized plug has two
blades being wider than the other. A grounding plug has two blades plus a round pin to ground.
The wide blade or the third prong is intended to provide security. If the provided plug does not fit
into your outlet, consult an electrician to replace the outlet.
9. Protect all wires connected to this unit from being walked on or pinched, particularly at plugs
and the point where the cord exits the unit. When unplugging from the electrical outlet, grasp the
plug and do not pull the cord.
10. Disconnect the unit during lightning storms or when long period is to remain unused.
11. Keep this unit off when connecting all the devices connected to it.
12. After finishing the installation and connections, connect all your equipment with low volume
level. Once all devices are connected, slowly increase the volume or level controls to achieve the
proper position.
13. Before placement, installation, assembly or suspending any product, inspect all equipment,
suspension, cabinets, transducers, brackets and associated equipment. Any missing component,
corroded, deformed, or with non-nominal load can reduce the intensity, placement and arrange -
ment of the installation significantly. Any of these conditions can reduce the security of the facility
and must be corrected immediately. Use only suitable equipment for the loading conditions of
the installation and that any possibility of reducing term, unexpected overload, never exceed the
capacity of the material or equipment.
14. Consult a licensed professional to install the equipment and make sure that all local, regional
and national regulations related to security are understood and adhered to.
15. All services should be performed by qualified professionals. Servicing is required when the
apparatus has been damaged in any way, as if having the power cord or its damaged connector,
or if the machine breaks contact with liquid or if any object is inserted in the unit or if the unit is
exposed to rain or moisture, or if the unit does not operate normally, or has been dropped.
CHARGE THE BATTERY FULLY BEFORE FIRST USE TO OPTIMIZE ITS LIFETIME PERFOR -
MANCE.
IMPORTANT SAFETY INSTRUCTIONS