background image

6

PAIRING A BLUETOOTH® DEVICE

Use Bluetooth® mode to stream music from a Bluetooth® enabled player (e.g., 

smartphone or tablet device). A device must be paired with the unit before using them 

together for the first time.

To pair a Bluetooth® enabled device with the Speaker, follow these steps:

1. Make sure Bluetooth® is enabled on your device and that it is next to the unit before 

attempting to pair it. 

2. Turn on the Speaker. On the front panel, press the mode button to enter Bluetooth 

mode. The speaker will say “Bluetooth mode”.

3. Use your device to search for nearby Bluetooth devices. The Speaker will be listed as 

“NDS-1236”. (This function is usually in the Bluetooth® settings menu; refer to your 

device’s instruction manual to learn more.) 

4. Select “NDS-1236” from the list of found/available devices. The Speaker will say 

“Bluetooth Connected” upon successful connection.

     

You can now start playback on your connected device to begin streaming music to the 

speaker. Use your Bluetooth device to select songs, Play/Pause music feedback, and 

adjust the speaker volume.

TWS FUNCTION

1. Turn on the identical speakers you intend to use (Please note they must be the same 

pairing name). Switch both speakers to BT mode.

2. Press and hold the “NEXT” button until you hear the system say “Bluetooth Connect

-

ed”, notifying you of a successful connection.

3. Connect your external Bluetooth device to the speaker using the steps listed in the 

previous section, 

PAIRING A BLUETOOTH® DEVICE.

4. Begin playback and the audio will play through the two connected speakers.

NOTE:

 TWS functionality is for two speakers at a time only. It can not support more than 

two speakers at the same time.

Summary of Contents for NDS-1236












Reviews: