Naxa NAS-3070, Instruction Manual

Page: 5 / 12

www.naxa.com Page 5
Pairing a Device with
Bluetooth
®
A device must be paired with the speaker before using
them together for the first time.
To place the speaker in Pairing mode, press the PAIR
button. The status indicator will flash blue quickly.
Then:
1. Make sure Bluetooth is enabled on your device. En-
able it if it hasn’t.
2. Use your device to search for nearby Bluetooth
connections. (This function is usually in the Blue-
tooth settings menu; refer to your device’s instruc-
tion manual to learn more.)
3. The speaker will announce itself as “NAS-3070.”
Select it from the list of devices.
4. If your device asks for a passcode, use “0000” to
complete the pairing process.
When the speaker is paired and connected to a device,
the status indicator will light a steady blue.
Using the AUX Input
Connector
Connect devices without Bluetooth
®
by using the AUX
connection. A 3.5mm stereo patch cable is required to
make this connection.
1. Use a 3.5mm stereo patch cable to connect the de-
vice’s headphone or line-out jack to the AUX con-
nector [7] found on the back of the speaker.
2. Turn on the device and the speaker. Lower the vol-
ume on both.
3. Set the device volume to 80% of its maximum and
then start playback.
4. Press the + button [4] to increase the volume grad-
ually to a comfortable level.
⚠ L
The active speaker source will switch to
AUX when a device is connected to the AUX
connector [7]. Audio output from Bluetooth
will be disabled while the AUX connector is
being used.