Naxa NAS-3049, Instruction Manual

Page: 6 / 16

Page 6 Naxa Electronics
⚠
⚠
The battery used in this device may present
a fire or chemical burn if mistreated. Do not
disassemble, incinerate, or heat the battery.
Do not leave the battery in a place subject
to direct sunlight, or in a car with its win-
dows closed.
Do not connect the unit to a power source
other than that which is indicated here or on
the label as this may result in the risk of fire
or electric shock.
Turning the Speaker On/Off
To turn the speaker on, set the ON/OFF switch [8] to the
“ON” position. The status LED will flash blue quickly.
To turn the speaker off, set the ON/OFF switch [8] to
the “Off” position.
About the Status Indi-
cator
The status indicator lights up to let you know which
mode the speaker is in.
Status indicator Speaker Mode
Steady red when the speaker is
connected to USB power The speaker is charging
Off when the speaker is con-
nected to USB power The speaker is fully charged
Flashing quickly red The speaker is on but not
connected to a Bluetooth
®
device.
The red LED will show ""BT The speaker is connected to a
Bluetooth
®
device
Flashing quickly red The speaker is in pairing
mode (ready to connect to a
Bluetooth
®
device)