Naxa NAS-3049, Instruction Manual

Page: 5 / 16

www.naxa.com Page 5
Connecting Power
Your speaker can be powered by the included recharge-
able battery. Upon initial use, the battery should be
charged fully to ensure optimal performance and bat-
tery life.
Installing the Battery:
1. Remove the cover of the battery compartment [11]
found on the back of the speaker.
2. Place the rechargeable battery (BL-5C) in the bat-
tery compartment, taking care to match the +/–
poles of the battery with the markings in the com-
partment.
3. Replace the cover of the battery compartment.
Charging the Battery
Use the included USB cable to connect the speaker to a
USB power source to charge the battery.
• Connect the small end of the cable to the USB
charge port of the unit.
• Connect the large end of the cable to a high-power
USB port of a computer. The computer should be
powered on.
The status LED will light a steady red when the battery
is charging. When charging is complete, the status LED
will darken.
⚠
⚠
DO NOT USE the speaker while charging
the battery. To use the speaker while con-
nected to a USB power source, remove the
battery first.
Do not charge the battery for more than
5 hours at a time as this may shorten the
operational life of the battery.
⚠ L
It takes approximately 2 hours to charge
the unit fully when connected to a stan-
dard USB port.