NAWON HTM-3788LDi, Operating Manual

Page: 10 / 36

(6) Pedal S/W Operation
ⓐ UP / DOWN of Upper Roller (S/W “B”)
1) Whenever Pedal S/W B in [Figure 1] is stepped on, the upper roller moves
up and down.
S/W “B” (Upper rollr part)
[Figure 1]
ⓑ Start Operation (S/W “A”)
1) If Pedal S/W A in [Figure 1] is slightly stepped on,
roller revolves and a nozzle moves.
2) If it’s hit on hard, the tape is cut off and a nozzle stays in a roller for some time
and returns to an original place. Then, the upper roller goes up after revolving
for some time. Then, tape keeps going down up to the next work position.
S/W “A” (Nozzle part)
ⓒ Finishing Up (Switch Off)
1) Switch off nozzle temperature and roller temperature
2) If the nozzle temperature is lower than 70℃, remove air. Switch off power.
3) If air is removed before nozzle temperature falls, a heater may break down.
9