VHF 7110 Installation Supplement
16
NAVMAN
Wiring Details
In case a cable is cut accidentally the pinouts are shown here for information only.
Do not cut cables intentionally.
Cable
Pinout
Color
1 VHF Antenna
2 Power
1. 13.6V DC +
Red (thick cable)
2. 13.6V DC -
Black (thick cable)
3 External speaker
1. EXTERNAL SPK +
White (thin cable)
2. EXTERNAL SPK -
Black (thin cable)
4 Handset connection
1. MIC
White
2. Shielding core for MIC
Copper-colored
3. SPEAKER
Black
4. POWER
Red
5. Tx D+
Yellow
5 GPS connector (pins used)
4. NMEA IN +
Yellow
5. NMEA IN -
Green
2. NMEA OUT +
Orange
6. NMEA OUT -
Black
Connect the Radio Cables - Rear view of base unit
1. VHF Antenna connection. (Antenna is not supplied.)
2. Combined power and speaker cable. The end of the power cable splits in two:
BLACK. Earth. Connect to the (-) NEGATIVE battery terminal.
RED. Power. Connect to the (+) POSITIVE battery terminal. Check that a 10A fuse is installed on
this power cable, close to the battery.
3. External speaker cable.
4. Handset connection cable.
5. GPS connector cable.
1
2
3
4
5
