Navman VHF 7110 Quick Start Manual Download Page 5

Page: 5 / 18

VHF 7110 Quick Start Guide

NAVMAN

Select the Radio Setup OR DSC Call Menu

Base Unit, Microphone and

Handset

• Press

CALL

MENU

on the base unit or

handset to show the DSC Call Menu.

• Hold down

CALL

MENU

on the base unit

or handset to show the Radio Setup
Menu.

CALL

MENU

Set Backlighting Levels

Base Unit and Microphone

• Hold down

CALL

MENU

• Use CH or CH to scroll through

the menu listing to BACKLIGHT.

• Press

ENT

• Press CH or CH to select the

desired backlight level.
There are eight (8) levels.

• Press

ENT

to store the setting.

CALL

MENU

  MENU SELECT
  BUDDY LIST
  LOCAL/DIST

BACKLIGHT

Handset

• Hold down

CALL

MENU

• Press or to scroll through the

menu listing to BACKLIGHT.

• Press

ENT

• Press or to select the desired

backlight level.
There are eight (8) levels.

• Press

ENT

to store the setting.

CALL

MENU

  MENU SELECT
  BUDDY LIST
  LOCAL/DIST

BACKLIGHT

Summary of Contents for VHF 7110



















Search results

Summary of Contents for VHF 7110

Reviews:

Related manuals for VHF 7110

Brands by name

Popular brands

Navman VHF 7110, Quick Start Manual

Search results

Summary of Contents for VHF 7110

Reviews:

Related manuals for VHF 7110

Brands by name

Popular brands