background image

G-PILOT 3100 

Operation Manual

NAVMAN

 

24

6-2 Engaging the G-PILOT 3100 in wind mode

Heading = 45°

SWA = 40°

Wind
APP = P40°

Manually steer the boat to open 
waters. Sail straight at the in-
tended wind angle.

The G-PILOT info data can 
display TRUE (true wind angle) 
or APP (apparent wind angle) 
(see section 3-4).

HANDSTEER:

Steer the boat manually. Display CTS in the 
info data or course error in the bar data and 
use these to steer by.

To engage AUTO,

hold 

AUTO

For example:

To engage HAND STEER,

hold 

AUTO

 + 

MENU

AUTO:

The G-PILOT steers the boat automatically.

The G-PILOT 3100 sets CTS (course to steer) to the current 
heading, in this example 45°, sets SWA (set wind angle) to the 
current wind angle and starts steering at this wind angle.

To disengage the G-PILOT, press 

AUTO

 

The G-PILOT returns to STBY (standby).  
Steer the boat manually.

Wind
APP = P40°

The G-PILOT 3100 can also be engaged on the 
starboard tack, for example:                       

 

or when running, for example:       

APP = S40°

SWA = 40°

Wind

APP = S120°

SWA = 120°

Wind

Summary of Contents for G-PILOT 3100





































Reviews: